In-depth Demand Report | Disassembling Sheet Metal Laser Cutter

Laser marking machines use laser beams to mark permanent marks on the surface of a variety of different chemical substances. When purchasing a UV laser marking machine, much attention is paid to the marking speed of the equipment, because this directly affects the efficiency of processing order information. So, what are the factors that affect the speed of UV laser marking machines?

Generally speaking, the main reasons that affect the marking speed of UV laser marking machines are divided into two aspects. One is the equipment itself, and the other is the production and processing of product workpieces.

The main reasons for the equipment itself include laser frequency, laser spot mode and light diffusion angle, laser power, effective optical plastic surgery and auxiliary gas during processing. Customers should consider this aspect when purchasing a UV laser marking machine, and it is recommended to follow the recommendations of professional engineers for model selection. Another reason is mainly the marking density, marking width, marking depth and laser spot size during processing.

Marking density: In the case of the same format, the same light spot, and the same depth, the higher the marking density, the corresponding marking speed will be slower, because the density directly increases the marking area.

Marking format: The marking speed of large format is slower than that of small format, because the total offset area of 窶銀€逆he large format marking scanning galvanometer increases.

Marking depth: According to requirements, if you need to increase the depth of marking, you need to adjust the parameters of the UV laser marking machine and increase the power, current and other parameters of the UV laser marking machine. These are Will affect the marking speed.

The portable handheld laser marking machine is available in two models: lithium battery and plug-in, to meet different needs. It has an intelligent red light positioning system, high-precision laser, built-in operating system, and quick touch display. It can mark a variety of content, including graphic barcodes, QR codes, graphics, pictures, logos, etc., and supports file formats such as PLT/HPGL/JPG/DXF. It is compact and lightweight, suitable for marking industrial, automotive castings, flanges, outer packaging boxes, large and heavy items that are not easy to move. It also supports marking all metals, such as stainless steel, plastic, PVC plastic, metal, rubber and cement walls, etc.

The carbon dioxide laser marking machine is a laser marking machine that uses carbon dioxide gas as the working medium. It generates a laser with a wavelength of 10.64um through high-voltage discharge. After scanning and focusing by a galvanometer, it marks the surface of the workpiece. It is suitable for various non-metallic materials and some metal products.

The CO2 laser marking machine uses an infrared light band, a 10.64μm gas laser, and fills CO2 gas into a high-voltage discharge tube to produce a glow discharge, causing the gas molecules to release lasers. After amplifying the laser energy, a laser beam is formed for material processing. The laser beam vaporizes the surface of the processed object to achieve the purpose of engraving.

Co2 laser marking machine can mark a variety of non-metallic materials and some metal products, such as bamboo products, wood, paper ABS PVC epoxy resin, acrylic, leather, glass, architectural ceramics, rubber, etc. It is widely used in pharmaceutical packaging, food packaging, beverage packaging, plastics, textiles, leather, wood, handicrafts, electronic components, communications, clocks, glasses, printing and other industries.

The UV laser marking machine belongs to the series of laser marking machines, but it is developed using a 355nm UV laser. The machine uses the third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV light focus spot is extremely small, which can greatly reduce the mechanical deformation of the material and has little processing heat effect.

Because the UV laser has an extremely small focus spot and a small processing heat-affected zone, it can be used for ultra-fine marking and special material marking. It is the preferred product for customers who have higher requirements for marking effects. In addition to copper materials, UV lasers are suitable for processing a wider range of materials. Not only does it have good beam quality, but it also has a smaller focus spot, which can achieve ultra-fine marking; it has a wider range of applications; the heat-affected zone is extremely small, so there will be no thermal effect, and there will be no material burning problem; the marking speed is fast and the efficiency is high; the overall performance of the machine is stable, the size is small, and the power consumption is low.

UV laser marking machine is mainly based on its unique low-power laser beam, which is particularly suitable for the high-end market of ultra-fine processing. It can mark the surface of packaging bottles of cosmetics, medicines, foods and other polymer materials with fine effect, clear and firm marking, better than ink jet coding and pollution-free; marking and scribing of flexible PCB boards; micro-hole and blind hole processing of silicon wafers; marking of LCD glass QR codes, surface drilling of glassware, marking of metal surface coatings, plastic buttons, electronic components, gifts, communication equipment, building materials, etc.

The lenses used in the laser head are the core components of the laser equipment. They play a key role in the laser head to adjust and control the optical path. They include focusing lenses, collimating lenses, protective lenses and reflective lenes.