In-depth Demand Report | Disassembling Fiber Laser Source

Laser marking machines use laser beams to mark permanent marks on the surface of a variety of different chemical substances. When purchasing a UV laser marking machine, much attention is paid to the marking speed of the equipment, because this directly affects the efficiency of processing order information. So, what are the factors that affect the speed of UV laser marking machines?

Generally speaking, the main reasons that affect the marking speed of UV laser marking machines are divided into two aspects. One is the equipment itself, and the other is the production and processing of product workpieces.

The main reasons for the equipment itself include laser frequency, laser spot mode and light diffusion angle, laser power, effective optical plastic surgery and auxiliary gas during processing. Customers should consider this aspect when purchasing a UV laser marking machine, and it is recommended to follow the recommendations of professional engineers for model selection. Another reason is mainly the marking density, marking width, marking depth and laser spot size during processing.

Marking density: In the case of the same format, the same light spot, and the same depth, the higher the marking density, the corresponding marking speed will be slower, because the density directly increases the marking area.

Marking format: The marking speed of large format is slower than that of small format, because the total offset area of 窶銀€逆he large format marking scanning galvanometer increases.

Marking depth: According to requirements, if you need to increase the depth of marking, you need to adjust the parameters of the UV laser marking machine and increase the power, current and other parameters of the UV laser marking machine.  These are Will affect the marking speed.

Advantages of laser cutting machines in sheet metal processing Compared with laser cutting machines, traditional cutting machines have low efficiency and poor precision. They cannot process precision parts and require experienced technicians to operate them. However, laser cutters are different. Laser cutting has the characteristics of high precision, fast cutting speed, not limited to cutting patterns, automatic typesetting, material saving, smooth cutting, and low processing cost; laser cutting has small heat-affected zone, small plate deformation, and narrow cutting slit; the incision has no mechanical stress , no shearing burrs; high processing accuracy, good repeatability, no damage to the material surface; CNC programming can process any plan, and can cut the entire sheet in large format without opening a mold, which has the advantages of economy and time saving. It can process sheet metal, stainless steel, chassis and cabinets.

There are many machines and equipment used in sheet metal processing because there are many processes, mainly including lathes, milling machines, planers, drill presses, boring machines, broaching machines, grinders and polishing machines. These machines and equipment can be subdivided.

Before the equipment is put into use, its workplace should be clean and free of debris. The oil pipes, gas pipes, wires, cables, etc. on site should be cleaned to prevent them from being damaged by rubbing during operation. The joints of oil pipes, air pipes, etc. should be checked frequently to see if they are tight, loose, or damaged. If damaged, it should be replaced immediately.

Processing Depending on the sheet metal processing, the process flow is also very different. Initially, it must go through the processes of blanking, assembly, flanging, stamping, bending and welding. Professional sheet metal processing companies have more excellent technical personnel who can accurately perform processes such as blanking and cutting to reduce product errors. Machining tools, lathes and technicians have become essential requirements. Only with these can we do a good job in sheet metal processing.